E-cig Starter Kit

The E-cigarette Starter Kit includes:

• 2 x 1100mAh eGo-T green batteries 
• 2 x CE4 green clearomizers 
• 1 x eGo hard travel case 
• 1 x Australian Plug 
• 1 x USB charger
• 1 x 10ml e-liquid (MLB or Menthol flavour)

The instructions on how to use the starter can be found HERE.

So, you have made the decision to purchase an e-cigarette. It has arrived but you are not really sure where to start. There are a few steps that you must follow in order to get the best result with your new device. Here is what you should be doing with your new purchase. 

When your product arrives you will need to remove it from the package. Next, find the battery and the charger. Of course, you have to have both of these for you to charge the battery. Your device will not work if the battery is does not have a full charge. Once you have both of these in your hand you will need to connect the battery to the charger. Many of the devices that you purchase will have an LED light on the tip that lights up when the battery has been connected properly. So, watch for this to blink to let you know that the battery is working.

 

Now, if you want your electronic ciggy to work properly you must allow it to charge completely. Again, the LED light on the device is going to let you know that the cig has been completely charged. Most of the time, the light will turn on and remain on. At this time you will know that your device is ready to use.

Take the battery off of the charger and find the clearomizer that came in your package. The battery needs to be connected to the clearomizer. When you have completed this step you will see that you can begin puffing away. If you notice that the LED light is flashing numerous times in a row then you know that it is time for the battery to be charged again. In this situation you will simply need to disconnect the battery from the cartridge and reconnect it to the charger.

Most people want to know just how long it will take for their battery to be completely the charged. Every device is different but most of the time you will find that it will take anywhere from two to three hours for it to be completely charged and ready to use. Some of them are going to take up to five hours the first time that you are charging it. You should know that you are going to get the very best performance from your electronic device if you are willing to allow it to charge fully each and every time that it needs a charge.

A final thought when charging your e-cig is that the devices are going to allow you to check the status of the charging. If you look at your device you might see that there is a black button that you can push. Doing so will let you know if your device is done charging, or if it is still charging.